"D" Model Only
|
P-51D |
|
Length 92" |
|
Wing Span 102" |
|
Wing Area 1800 sq. in. |
|
Weight 32 lbs. |
|
Zenoah 62, Sachs 4.2, and up. |
|
Scale 1/5 |
|
$450.00 |
GEAR: Likes Line--Electrical (my preference) Robart (if you like air)
WHEELS: Likes Line or Dubro
SPINNERS: Tru-Turn (expensive but worth it)
RADIOS: I use Futaba 7ch (but only need 5 & 6 for gear and flaps)
SERVOS: Regular Futubas OK if using 1 per control surface.
Example: 1 Servo for left Aileron and 1 Servo for right Aileron.
2 Servos-Elevator--1 for right half and 1 for left half; 2 Servos-Flaps--1 for right and 1 for left.
I use large scale servo on rudder (if tail wheels connect to same servo). Regular for Gear Actuator and Throttle Control.
COVERING: I use 1oz. or lighter fiberglass cloth to cover foam sheeted surfaces (like wings, rudder, elevators, etc.)
ENGINE: We handle the Aerrow Quadra Line of Gas Engines. All single fighters fly fine on Quadra 65, 70 or 100. The 75 is my preference; plenty of power. They will fly on smaller engines but your over-the-top maneuvers will be somewhat limited.